Tuesday, February 19, 2019

How To Improve Your Water Heater’s Efficiency

water heaterAccording to statistics from the DOE, or US Dept. of Energy, almost 20% of energy bills of every average American household is for water heating. As such, these costs can add up quite quickly, draining the wallets of Americans. But, there are numerous ways in which you can reduce these costs.

Explore Our Plumbing Services

How To Reduce  Your Water Heating Costs With Water Heater Maintenance Raritan NJ

The fact is that you can reduce water heating costs significantly by taking action toward improving the efficiency of your water heater. The tips below are sure to help.

Flushing The Hot Water Tank Heater

Eventually, minerals that occur naturally in water, including magnesium and calcium, will settle in the hot water tank. Neglected, the added sediment will build up and cause the system to function less efficiently by using more energy. Simultaneously, the appliance will also, very likely, begin to exhibit common problems, like inconsistent water temperatures, as well as clogged pipes leading to a diminished water supply.

If clogging occurs, as a result of sediment buildup, the pressure can eventually cause the tank to explode. Therefore, it is in your best interest to hire a qualified plumber that will regularly flush out the water heater’s tank. For those who live in areas where there is hard water, it is highly recommended to invest in a water softener that helps to reduce limescale and mineral buildup over time.

Call Now: (908) 707-1776

Increase Energy Efficiency By Insulating The Water Heating System

hot water heater maintenanceHeat loss occurs when water flows from the system, through the pipes, and to the tap, so insulating the water pipes will make a huge difference. According to the DOE, by insulating the hot water pipes, it can increase water temperature by up to 4 degrees Fahrenheit, meaning you can turn down the hot water tank’s thermostat. In addition to that, insulated water pipes will reduce the likelihood of their freezing during wintertime. However, it is imperative to use fiberglass pipe-wrap for safety purposes, should the pipes be close to the flue. This fiberglass must be a minimum of an inch thick and it should not have a coated layer on it.

Insulate the hot water tank if you have this type of water heater system. The best and most cost-effective way to do this is to use specifically-designed insulative blankets, especially if your tank is not well insulated, something common with older tanks. Insulative blankets should be used if the tank is old, has an R-value up to 24, or is poorly insulated. These blankets are excellent at minimizing heat loss, and they are relatively inexpensive.

Be sure to call a plumber to carry this task out for you. They will ensure that it is done correctly and safely.

Plug Leaks In Your Water System

Check for and repair any leaks. This job is not for the average consumer. Therefore, you should hire a plumber with experience in dealing with hot water plumbing systems. If your hot water plumbing system leaks, it will significantly affect the efficiency of the water heater.

A plumber with experience will conduct an inspection that will also encompass the temperature gauge and pressure relief values of your system. Moreover, the plumber will ensure that the system works perfectly right to the faucets and shower heads. The hot water plumbing system that is completely intact and without any leaks will work efficiently. Therefore, there will be no hot water waste in your home.

Schedule A Free In-Home Estimate

Save Hot Water & Reduce Energy Costs

Reducing hot water consumption is the easiest method in reducing energy costs and improving the efficiency of the water heater. It’s really simple math. The more hot water that you use, the more energy that you will require to heat that water. Therefore, homeowners can achieve these goals by purchasing energy efficient appliances, using the dishwasher economy setting and reducing those long showers. Another way to reduce hot water costs is to turn down your water heater’s thermostat.

&nbsp:

In Conclusion

American water heating costs are typically quite high throughout the country. By doing what’s necessary to make the water heater in your home more efficient, such as by following the above recommendations, you can reduce those costs.

For all of your residential plumbing needs, call Skylands Energy. Our team’s licensed plumbers will provide dependable services and practical solutions. Our goal is to provide excellent services at affordable rates. Give Skylands Energy a call to get a free estimate on whatever your plumbing needs may be.

Schedule An Appointment: (908) 707-1776

Some of the areas we service include Bridgewater, Martinsville, Raritan, Somerville, and these zip codes: 08807, 08836, 08869, 08876 as well as all surrounding areas in Somerset County, New Jersey.

Contact us now at (908) 707-1776 to find out more!

The post How To Improve Your Water Heater’s Efficiency appeared first on Skylands Energy.



from Skylands Energy https://www.skylandsenergy.com/plumbing/water-heater-maintenance-raritan-nj/
via IFTTT

Sunday, February 17, 2019

Common Oil Furnace Issues You May Encounter This Winter

furnace technicianWhile many home heating systems around the country are powered by natural gas, there is still a large number of homes that are heated by an oil furnace. An oil-burning furnace can simply be looked at as a blowtorch that burns fuel oil in a fireproof box. In the adjacent box, heat from the firebox is used to heat air. A powerful blower pumps air in and out of the adjacent box. It uses a network of air ducts to supply the heated air to different parts of the house.

Learn More About Our Heating Services

Oil Furnace Repair Branchburg NJ: Common Oil Furnace Issues You May Encounter

In an oil-powered heating system, there must be a fuel tank installed outdoors. Many are above-ground or underground. Whatever the configuration, the system must have a fuel pump to deliver fuel oil to the burner at high pressure. An oil filter will ensure that no debris gets to the burner. Electronic ignition is typically used to provide the spark needed to ignite the pressurized fuel oil.

Over time, heating systems can develop different types of problems. Hence, why it requires regular maintenance. When regularly maintained, heating systems perform optimally. However, like all machinery, from time to time, all heating equipment will malfunction for one reason or another. Below is a list of some common oil furnace issues you may encounter at home:

Heating Failure: Thermostat & Air Filter

thermostatThere are many reasons why a furnace may fail to turn on when needed. The first reason could be a faulty thermostat that fails to prompt the transformer to ignite the furnace. Another possible cause is a defective ignition transformer. A clogged air filter, damaged fuel pump, clogged fuel lines, and lack of fuel oil in the tank are some of the possible causes of heating failure. Whatever the issue your furnace may have developed, it is always recommended you hire a competent HVAC contractor to carry out repairs.

It is always recommended you fill up your oil tank before the cold season to ensure you have an ample supply of fuel oil keep you warm throughout the cold season. In addition to that, you need to replace your oil filters and have the entire heating system serviced regularly to avoid problems.

Unusual Noises & Sounds Coming From Your Heating System

Your furnace may produce all manner of noises, which can be an indicator of severe problems in the system. For instance, grinding noises may indicate that there is a problem with motor bearings, so the unit needs to be shut down immediately for safety reasons. High-pitched sounds, such as squealing or screeching, on the other hand, may be an indication of problems with the blower motor or one of the belts.

  • Whistling Sound From Your Heating System: If your furnace produces a whistling sound, your air filter may be clogged. Dust and other types of debris might have blocked the air filter, which means that heated air has to be forced through a smaller area across the filter, thereby producing the whistling sound. To resolve this issue, you only need to clean the air filter or have it replaced. Any important HVAC tasks, such as repairs, should only be done by a professional.
  • Rumbling Sound: A burner is normally used to ignite the fuel oil in the burner. If the pilot light has been poorly set, or dirt has accumulated around the burner, a rumbling sound may be produced by the system. To fix the problem, simply press the reset button to resolve the issue. However, you should call a reliable HVAC contractor to fix your furnace if the burner is dirty.

Schedule An Appointment: (908) 707-1776

Poor Heating Performance And Uneven Temperatures

One of the most common home heating problems is uneven temperatures around the house and inadequate heating. If your rooms are cold, but the furnace is running normally, the problem could be obstructed air ducts. If there is a lot of debris obstructing your ducts, your home will not be properly heated. Duct cleaning can help to resolve this issue.

Explore Our HVAC Services

 

Conclusion

Skylands Energy Service offers superior HVAC services throughout Somerset County, New Jersey.

We specialize a full line of home comfort services including heater repairs, AC installations, HVAC tune-ups, and more. If you are experiencing heating issues in your home, our experienced NATE-certified technicians can help find the best and most practical solutions to fix the issues.

Our services ensure that your HVAC system is giving you the best possible comfort at the highest efficiency. By working with us, you will find that we have some of the most competitive prices in the area. Call Skylands Energy Service today to set up a free estimate.

Some of the areas that we service in Branchburg Township include Flagtown, Neshanic Station, Readington, Three Bridges and these zip codes 08821, 08853, 08870, 08887 as well as all surrounding areas in Somerset County, New Jersey.

Call Now: (908) 707-1776

Click here to contact us today or give us a call at (908) 707-1776 if you have any questions.

The post Common Oil Furnace Issues You May Encounter This Winter appeared first on Skylands Energy.



from Skylands Energy https://skylandsenergy.wpengine.com/heating-systems/oil-furnace-repair-branchburg-nj/
via IFTTT

Monday, February 4, 2019

Is Your Home Furnace Too Big?

HVAC serviceA bigger furnace in your home is not necessarily the best choice. Oversized furnaces can wreak havoc on your entire HVAC system, indoor air quality, and budget. When you are trying to increase the quality of your system, the last thing you need is for your “better” to be worse.

If your furnace is too large for your HVAC system to accommodate, the entire system will begin to have problems. Not only is this a problem for your health and heating, but it may also eventually end up costing more than you counted on paying. Your heating system will not last as long as it is expected to. Your home comfort will suffer and you will have issues with your indoor air quality. Furthermore, it is expensive to operate a furnace that is too large. Your monthly energy costs will increase. Also, a system that is too large will require more repairs than one that is properly sized.

Unfortunately, many homeowners, all too often, make the mistake of buying a furnace that is too large.

Learn More About Our Heating Services

Top Signs That Your Furnace Is Not Sized Correctly

So how can you tell if your furnace is too big? Following are possible signs that the fit is not right.

Overly Complicated Furnace Installation

An oversized furnace causes real problems with installation. When the furnace you buy for your home is oversized, it will be necessary for extra services to be done. The heating connections will have to be readjusted or moved. This will cost you more in labor and equipment. It is also possible that the ductwork in your home will not coordinate with the size of your furnace. This requires modifications or replacement of your ductwork as well.

An Oversized Furnace & Indoor Air Quality

Inconsistency in the humidity throughout your home will make you less comfortable. When the humidity is too high, it causes damage to your system and your home. It may even compromise your health. High humidity causes the growth of mold throughout your home. Mold may appear on ceilings and walls. It causes trouble with your respiratory health. Two signs of mold include congestion of the nasal passages and the triggering of asthma. This is caused by mold allergens flowing throughout your home.

Schedule A Free In-Home Estimate

An Oversized Furnace Causes Your System To Short Cycle

natural gas furnaceWhen you have a heating system that is too large, your thermostat will read a higher temperature. Consequently, your furnace will turn off too soon to heat the rest of your house. This dilemma is referred to as short cycling.

When this process is repeated on a regular basis, the system begins to wear out and will require extra repair services. Your furnace will require replacement much sooner than it would if it were correctly sized. Short cycling will also increase your home heating costs.

Oversized Furnace & Temperature Imbalances

The areas that are close to the furnace will heat up quickly and the areas farther away will stay cooler. When you notice this difference in temperature from one room to another, the problem is probably caused by the overly large size of your furnace.

Learn More About Our Heating Services

Unnecessary High Heating & Operational Costs

HVAC costsShort cycling heating systems require extra energy. With an oversized system, your heating costs will reflect the poor performance. Your heating bill will be high until you have your furnace replaced by a knowledgeable HVAC technician.

Oversized Furnaces Are Too Loud & Noisy

The furnace’s large size is not the only reason for a loud system, but it can be a major one. The noise is not only an annoyance but also a symptom of a real problem.

A High-Efficiency Rating Is Inconsistent With System Performance

If your furnace is the wrong size, it cannot reach the high-efficiency performance you would expect it to. For example, if your furnace is too large and it has a high AFUE and BTU rating, it will not perform as efficiently as it is capable of. Instead, if you install a furnace that is sized correctly, then it will perform in accordance with its AFUE and BTU ratings.

 

Conclusion

Many issues come with installing a furnace that is simply too large. When it comes to HVAC installations, it is vital for you to install a system that is sized correctly for your home. A system that is large comes with high heating costs, poor indoor air quality, premature replacement, and more. It is crucial to call a professional HVAC company to perform a Manual J calculation before installation takes place. If you already have an oversized furnace, then call a professional and reputable HVAC tech. They will recognize these problems and recommend a heater that fits your home.

The NATE certified and experienced technicians at Skylands Energy can provide you with excellent home comfort services. When working with us, you can expect professionalism, quality, and affordability.

Nobody wants to deal with constant heating problems and the higher energy costs that go along with them. Your home and family should have a healthy heating system that lasts for years to come. Skylands Energy can assist you with expert, high-quality maintenance, installations, and repairs.

If you need a new HVAC system installed or are experiencing problems with your current system, call Skylands Energy today. Our company will give you a free, in-home estimate of the needed services. You can always count on us to provide you with quality, affordable service. Call now!

Contact us today or give us a call at (908) 707-1776 if you have any questions.

Call Now: (908) 707-1776

The post Is Your Home Furnace Too Big? appeared first on Skylands Energy.



from Skylands Energy https://skylandsenergy.com/heating-systems/signs-that-your-furnace-is-not-sized-correctly/
via IFTTT

How to Tell If Your Furnace Is Short-Cycling & What to Do

The chill in the air means that winter is on its way. The freezing temperatures are likely to bring discomfort to your home. Make sure that...